The wine fermenting tank is a product developed by our company according to the wine fermenting tank technology from abroad. The equipment is mainly composed of top, top material distributing device, cooling jacket part, liquid level observation part, conical bottom part, bottom residue scraping mechanism, residue discharging device, wine storage and wine internal circulating systems etc. The grape pulps are fermented in the fermenting tank. The temperature control to the fermenting liquid in the tank is realized through jacket cooling. By the aid of circulating pump, external circulating pipe and material distributing device installed inside the tank, the grape juice will be sprayed from the tank top and return to the tank. According to the technological requirements, the circulation shall be made 2~3 times every day, continuing about 30~60min every time (the user can adjust the circulation time according to his own technological conditions). When the juice and residue are separated, first pump away the juice, then start the scraping board motor at the bottom of the tank, and the residue will be discharged from the residue discharging vent at the bottom of the tank.
Now our company is capable of designing, manufacturing and installing wine fermenting tank 【Ganimede】, horizontal rotary dry red wine fermenting tank, dry white wine fermenting tank, and dry red wine fermenting tank with mechanical residue discharging or manual residue discharging etc.
Fixed-capacity dry white wine fermentation and storage tanks designed for dry white wine. These come from Sylvania design aesthetic side of the tank with elliptical manhole, a two-inch outfall, Filling a two-inch hole, a sampling valve, and many more accessories (see the following attached Parts) to ensure high-quality wines and ease of use. Gradient of 10% (optional 15% or 35%) The end of the ramp structure makes it easier fermentation and emptied. These can also be equipped with temperature control system (Jacket, double bottom, temperature controller, etc.).
Drain port DKE 2″TRI CLOVER (tanks 500GAL,750GAL and 1000GAL)or DKC 2″TRI
CLOVER(tanks 1500GAL and2000GAL)
Racking port 2″TRI CLOVER
Sample valve port 3/4″TRI CLOVER
Oval manway 310×440mm, the frame seamlessly formed out of the tank wall(tanks
500GAL) or oval manway
Top manway 420mm
Connection for thermometer 1/2″NPT
connection for probe 1/2″NPT
Cooling jacket Vt h750mm 6bar
Lifting rings
Ladder hoider, width 410mm
ACCESSORIES
Sample valve 3/4″TRI CLOVER
Clamp 3/4″TRI CLOVER
Gasket 3/4″TRI CLOVER
Preesure compensating valve DIN 50
Material: ALSI316L-tank lid; AISI304-OTHER PARTS
Wechant
